Vehicle Hold

When Model 3Model Y is stopped, Vehicle Hold can continue to apply the brakes even after you remove your foot from the brake pedal. When driving on a hill or on a flat surface, brake as you normally would. After coming to a complete stop, simply press the brake pedal again (until the touchscreen displays the Vehicle Hold indicator light) to enable Vehicle Hold. You can then release the brake pedal and remain stopped, even on a hill.

Gray icon of an "H" in a circle.
This indicator displays on the touchscreen whenever Vehicle Hold is actively braking Model 3Model Y.

To disengage Vehicle Hold, press the accelerator pedal or press and release the brake pedal.

Note: Shifting into Neutral also disengages Vehicle Hold.
Note: After actively braking Model 3Model Y for approximately ten minutes, Model 3Model Y shifts into Park and Vehicle Hold cancels. Model 3Model Y also shifts into Park if it detects that the driver has left the vehicle.
Note: When Stopping Mode is set to Hold (see Stopping Mode), Vehicle Hold engages automatically whenever Model 3Model Y stops while in a driving gear. There is no need to press the brake to engage it.