CP_a074_failedToEstablishV2gComm

CP_a074_failedToEstablishV2gComm
The charge port was unable to initialize the non-volatile memory module
PLC modem expected to be depopulated but established communication successfully
PLC modem responded when verifying that it is not populated
Supercharging blocked because option not enabled
The CP detects that a Supercharger is plugged in, but the car configuration indicates that supercharging is not allowed
The Supercharger is unplugged, or the car configuration enables supercharging
The CP does not detect that the latch assembly is connected to the CP ECU
The CP confirms that the latch assembly is connected to the CP ECU
Charge rate may be reduced, DC charging may be blocked
Latch has been manually disengaged
The latch transitions to the disengaged state from engaged or blocking without actuating it
Any door sensor detects the door is closed, and no cable is connected

file create by H⁺ 2022 v0325 updater.store