HVP_w006_OverChargeCurrentFault
Warns if the pack charge current is above max charge current limit
The pack charge current is above max charge current limit for X duration (in msec)
The pack charge current is below max charge current limit
The DC charging will end and contactors may open immdediately or pyro may disconnect
Warns if the CP ECU has faulted
These charging will not be allowed
Sets if an HVIL fault is detected. Contactors cannot close (car will no longer drive) if the contactors are currently open. If no repairs were performed and the alert clears on its own, there is risk of reoccurrence.
The HVIL is broken or HVIL nodes are lower than expected
Contactors will not close, it may open if vehicle not in drive
Warn if pack contactor enter to the BLOCKED state
Warns if the Energy reserve voltage supply is below minimum voltage threshold
The Energy reserve voltage supply is below minimum voltage threshold
The Energy reserve voltage supply is above minimum voltage threshold
The pyro diagnostics may fail, the contactors will not close
warn if harware triggers to blow the pyro
This is an indication that pyro was blown
The HVP config block may be missing, incorrect, or unsupported
The HVP is unable to initialize configuration parameters

file create by H+ 2022 v0325 updater.store