IBST_a157_masterCylPressInvalid
Scl: ESPiB3_pMC1 Invalid Value
DTS off set is too high Confirmed
Phase Current 2 out of range low. ECU internal fault, check wiring to the unit and or re-flash. If problem continures after several power cycles, reolace unit.
The measured average coil resistivity is above the max threshold.
Linear Position Sensor Channel 1 Sensor internal failure
FW set in case of temperature degradation level1
Vpre was externally feed. Possible internal shortcircuit. ECU internal fault, check wiring to the unit and/or re-flash. If problem continures after several power cycles, reolace unit.

file create by H+ 2022 v0325 updater.store