PM_a048_stabilityControlInhibit
Pedal Monitor Warning: Stability Control Inhibited.
The safety monitor has detected that stability control is interfering adversely with driving ability. This shall be accompanied by other stability control alerts to aid diagnosis.
The safety monitor has disabled stability control. Customer facing alert that stability control is disabled. Regenerative braking and certain AP features are now disabled.
Pedal Monitor Warning: Accelerator Pedal Error.
The safety monitor sets this condition when accelerator pedal sensor measurements are irrational or out of bounds.
This alert will clear when accelerator pedal sensor measurements are considered rational.
The safety monitor will initiate a limp condition for the remainder of the drive cycle.
Pedal Monitor Warning: Cruise remained on when commanded off.
The safety monitor sets this condition when cruise control operation intepreted by the drive inverter is considered implausible.
The safety monitor may automatically cancel cruise control operation or potentially escalate to inhibiting torque production when detected.
Pedal Monitor Warning: DIR CAN node MIA
PM is not receiving required feedback CAN messages from DIR
PM receives required feedback CAN messages from DIR
Pedal Monitor Warning: External Brake Torque Command is Invalid.
The safety monitor sets this condition when sensor or other ECU inputs into EBR functionality are deemed implausible.
The safety monitor will disable external braking request (EBR) for the remainder of the drive cycle.
Pedal Monitor Warning: Torque Command does not match DI torque command.
Pedal Monitor Warning: Stator Temperature Sensor Error.
The safety monitor sets this condition when stator temperature sensor measurements are irrational or out of bounds.
This alert will clear when stator temeperature sensor measurements are considered rational.
file create by H+ 2022 v0325 updater.store