RCM_a047_sideAccelBPillarRight

RCM_a047_sideAccelBPillarRight
There is a fault with the right B-Pillar impact sensor.
The power supply voltage is too high/low.
The power supply voltage is corrected.
Inertial measurement unit yaw rate offset compensation saturation limit reached.
There is a fault with the automatic locking retractor switch.
There is a fault with the front-right load limiter.
CAN initialization failure detected.
There is a fault with the left seat track position sensor.
There is a fault with the front-left lap pretensioner.
There is a fault with the front-left door impact sensor.
Driver orientation initialization has not been performed or plausibility check has failed.
Driver orientation is learned.
There is a fault with the second row right-side curtain airbag.
There is a fault with the passenger active vent.
There is a fault with the second stage of the passenger airbag.
There is a fault with the first stage of the passenger airbag.
There is a fault with the far-side inboard airbag.
Front passenger occupant classification system ECU CAN communication fault.
No front passenger occupant classification system ECU CAN communication fault present.
There is a fault with the front-center airbag.
There is a fault with the second row left-side pretensioner.

file create by H⁺ 2022 v0325 updater.store